Building an invisible TV (4K)

Media setups are not ordinarily this minimum!
Parts list:

Crazy-good DSP Amplifiers: https://ndt5.net/c/?si=14570&li=1627332&wi=363790&dl=en%2Fdayton-audio-kabd-4100.html

Tweeters: https://ndt5.net/c/?si=14570&li=1627332&wi=363790&ws=&dl=en%2Fsb-acoustics-sb26stcn-c000-4.html

Mid drivers: https://ndt5.net/c/?si=14570&li=1627332&wi=363790&dl=en%2Fdayton-audio-rs125p-8.html

Subwoofers: https://ndt5.net/c/?si=14570&li=1627332&wi=363790&dl=en%2Fsb-acoustics-sw26dbac76-4.html

Lower cost but virtually equal subwoofers: https://ndt5.net/c/?si=14570&li=1627332&wi=363790&dl=en%2Fdayton-audio-ls12-44.html

For 5.1 audio, one amp needs an extra two inputs, which can be acheived with one of these https://ndt5.net/c/?si=14570&li=1627332&wi=363790&dl=en%2Fsure-electronics-aa-ab41161.html (amp’s micro switch needs to be in the ‘S’ position)

The amps need a programming board to adjust their settings: https://ndt5.net/c/?si=14570&li=1627332&wi=363790&dl=en%2Fdayton-audio-kpx.html which can be utilised with Sigma Studio (free software)

5.1 HDMI Audio decoder board: https://s.click.aliexpress.com/e/_DnErkFt

3D Plans (Sketchup): https://diyperks.com/ikyteech/DIY-Perks-Invisible-TV-Plans.zip

Forum: https://forum.diyperks.com
Discord: https://discord.com/invite/XuTCwVwwnC

#MiniLEDTV #4KTV #invisible

10 Comments:

  1. Hey Matt, first off love your videos secondly but possibly more importantly the first plug on the right of the unit at 13:41 looks like one from china which doesn’t have a fuse in it which are sometimes shipped but aren’t up to code and don’t protect the cables and aren’t legal, in the uk, last thing i’d want was for there to be a safety problem endangering such a fantastic channel (https://mindmachine.co.uk/write-up/write-ups/region-specific-power-plugs/?v=79cba1185463, mentioned at the bottom of the page)

  2. pls paint the hinges black

  3. My view about living room entertainment just melted away! I need this!!!!

  4. its always cozy watching this guy

  5. Awesome build Matt.

  6. Tv looks awesome… nice project…

  7. PatrickSwayzeOnDbol

    guy really used masking tape to close the gaps……….

  8. Can you DESIGN ME A PRODUCT FOR MY GCSE DESIGN TECK

  9. Wow!!!
    What a built is that!!!
    Bravo!

  10. Stunning result, but the channel has clearly changed over the last two or so years, from true diy stuff to “check out what expensive stuff my sponsors have sent me” territory.
    Still good content with inspiring projects … but LTT vibes are increasing.

Leave a Reply

Your email address will not be published.